BRPS Zeolite Regeneration Unit
The BRPS zeolite regeneration unit is designed to purge sorbent with overheated steam to remove residual oil and toe remove the captured water (thermal desorption) by electric heating. The unit is most often used by electric energy, industrial and other facilities, which use adsorption for drying of lubricant and electrical insulation oil.
The unit can operate in the following modes:
- steam purge;
- drying;
- evacuation and cooling
| No | Parameter | Value |
| 1 | Steam purge:
– steam temperature, ºС – pressure, MPa – heater power, kW |
150
0.5 12 |
| 2 |
Drying – air blower capacity, m3/minute, minimum – air temperature, ºС |
2.3 150-250 |
| 3 | Evacuation
evacuation rate, liters / sec residual pressure, mbar (mPa), max |
6.6 2.5 (250) |
| 4 | Max air heater power, kW | 10.8 |
| 5 | Max cooler fan drive power, kW | 0.75 |
| 6 | Nominal power, kW, max | 13.2 |
| 7 | Dimensions, mm:
– length; – width; – height |
1100
650 1350 |
| 8 | Weight, kg, max | 210 |
- almost complete restoration of various sorbents (zolite, silica gel etc)
- significant extension of sorbent life;
- small size;
- mobility;
- simple operation and servicing.
Zeolite Regeneration Units ...
CMM-R Oil regeneration ...
CMM-4RP Adsorbent reactivation ...